United States
GSM
HSDPA
LTE
50%

Net10 APN settings for Kyocera DuraForce Pro

      Net10   Kyocera DuraForce Pro   Android

Kyocera DuraForce Pro is compatible with Net10 GSM, Net10 HSDPA and Net10 LTE 50%.

To configure Net10 APN settings with Kyocera DuraForce Pro follow below steps.

Net10 Internet & MMS APN settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Net10 2
APN: wap.tracfone
Proxy:
Port: 8080
Username:
Password:
Server:
MMSC: http://mms.tracfone.com/
MMS proxy:
MMS port:
MCC: 310
MNC:
Authentication type:
APN type: default,admin,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

If the above Net10 Internet & MMS APN settings do not work on your DuraForce Pro, make below changes to Net10 Internet & MMS APN settings to get Net 10 ATT 4G LTE on your Kyocera DuraForce Pro.

APNtfdata
Portblank
MMSChttp://mmsc.mobile.att.net
MMS proxyproxy.mobile.att.net
MMS port80
APN typedefault,mms,supl,hipri
Authentication typePAP
APN protocolIPv4

If the above Net10 Internet & MMS APN settings too do not work on your DuraForce Pro, make below changes to Net10 Internet & MMS APN settings to get Net 10 via Tracfone on your Kyocera DuraForce Pro.

Portblank
MMSChttp://mmsc.cingular.com
MMS proxy66.209.11.32
MMS port80
APN typedefault,mms,supl
Authentication typeNone
APN protocolIPv4

If the above Net10 Internet & MMS APN settings too do not work on your DuraForce Pro, make below changes to Net10 Internet & MMS APN settings to get Net 10 via Tracfone 2 on your Kyocera DuraForce Pro.

APNtftdata
Portblank
MMSChttp://mms-tf.net
MMS proxymms3.tracfone.com
MMS port80
APN typedefault,mms,supl
Authentication typeNone
APN protocolIPv4

If the above Net10 Internet & MMS APN settings too do not work on your DuraForce Pro, make below changes to Net10 Internet & MMS APN settings to get Net 10 via AT&T on your Kyocera DuraForce Pro.

APNRESELLER
Portblank
MMSChttp://mmsc.mobile.att.net
MMS proxyproxy.mobile.att.net
MMS port80
APN typedefault,mms,supl
Authentication typeNone
APN protocolIPv4

If the above Net10 Internet & MMS APN settings too do not work on your DuraForce Pro, make below changes to Net10 Internet & MMS APN settings to get Net 10 via AT&T Tracfone on your Kyocera DuraForce Pro.

APNtftdata
Portblank
MMSChttp://mmsc.mobile.att.net
MMS proxyproxy.mobile.att.net
MMS port80
APN typedefault,mms,supl,hipri
Authentication typePAP
APN protocolIPv4

If the above Net10 Internet & MMS APN settings too do not work on your DuraForce Pro, make below changes to Net10 Internet & MMS APN settings to get Net 10 via Tracfone MMS Proxy on your Kyocera DuraForce Pro.

Portblank
MMSChttp://mms.tracfone.com
MMS proxy216.155.165.40
MMS port8080
APN typedefault,mms,supl
Authentication typeNone
APN protocolIPv4

Net 10 via Tracfone 3 APN Settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Net10 2
APN: wap.tracfone
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.tracfone.com
MMS proxy:
MMS port: 8080
MCC: 310
MNC:
Authentication type: None
APN type:
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

Net 10 via Tracfone MMS Proxy 2 APN Settings

Go to Settings More / Mobile networks Access Point Names

Press on right top

Name: Net10 2
APN: wap.tracfone
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.tracfone.com
MMS proxy: 216.155.165.40
MMS port: 8080
MCC: 310
MNC:
Authentication type: None
APN type:
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
APN PPP phone number: Not set

Do not change the default values set by device for all blank fields above.

For Kyocera DuraForce Pro, when you type Net10 APN settings, make sure you enter APN settings in correct case. For example, if you are entering Net10 Internet & MMS APN settings make sure you enter APN as wap.tracfone and not as WAP.TRACFONE or Wap.tracfone. If entering Net 10 via Tracfone 2 APN Settings above to your Kyocera DuraForce Pro, APN should be entered as tftdata and not as TFTDATA or Tftdata.

Net10 MCC-MNC values

310-410

Kyocera DuraForce Pro compatibility with Net10

Kyocera DuraForce Pro is compatible with below network frequencies of Net10.

2G
GSM1900 MHz
850 MHz*
3G
HSDPA1900 MHz
850 MHz, 1700 MHz, 2100 MHz*
4G
LTEBand 12 700 MHz, Band 4 1700/2100 MHz, Band 26 850 MHz, Band 41 2500 MHz, Band 2 1900 MHz, Band 5 850 MHz*
*These frequencies of Net10 may not have countrywide coverage for Kyocera DuraForce Pro.

Explain Kyocera DuraForce Pro compatibility with Net10

Net10 2G APN with Kyocera DuraForce Pro

Kyocera DuraForce Pro supports Net10 2G on GSM 1900 MHz.
It will also support Net10 2G on GSM 850 MHz only in some areas of United States.

Net10 3G APN with Kyocera DuraForce Pro

Kyocera DuraForce Pro supports Net10 3G on HSDPA 1900 MHz.
It will also support Net10 3G on HSDPA 850 MHz, 1700 MHz and 2100 MHz only in some areas of United States.

Net10 4G LTE APN with Kyocera DuraForce Pro

Kyocera DuraForce Pro supports Net10 4G on LTE Band 12 700 MHz, Band 4 1700/2100 MHz, Band 26 850 MHz, Band 41 2500 MHz, Band 2 1900 MHz and Band 5 850 MHz only in some areas of United States.

Overall compatibililty of Kyocera DuraForce Pro with Net10 is 75%. The compatibility of Kyocera DuraForce Pro with Net10, or the Net10 network support on Kyocera DuraForce Pro we have explained here is only a technical specification match between Kyocera DuraForce Pro and Net10 network. Even Kyocera DuraForce Pro is listed as compatible here, Net10 network can still disallow (sometimes) Kyocera DuraForce Pro in their network using IMEI ranges. Therefore, this only explains if Net10 allows Kyocera DuraForce Pro in their network, whether Kyocera DuraForce Pro will work properly or not, in which bands Kyocera DuraForce Pro will work on Net10 and the network performance between Net10 and Kyocera DuraForce Pro. To check if Kyocera DuraForce Pro is really allowed in Net10 network please contact Net10 support. Do not use this website to decide to buy Kyocera DuraForce Pro to use on Net10.

Kyocera DuraForce Pro network specifications

OS Android 6.0 (Marshmallow)
Network bands GSM / HSPA / LTE
Speed HSPA 42.2/5.76 Mbps, LTE-A (2CA) Cat6 300/50 Mbps
Network frequencies GSM 850 / 900 / 1800 / 1900
HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100
LTE band 2(1900), 4(1700/2100), 5(850), 12(700), 25(1900), 26(850), 41(2500)
Select a different device... Select a different network...

Post reply

Name
Email
Device
Network